Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
sigma 100-300 f4
#11
pardon for dragging this post back from the past, but i just wanted to say that i picked up one of these lenses for the A mount and on a quick first look today it seems to be a good and useful buy for me, and at a good price too - so thanks Allan and Brightc for the pointers and sorry Lomskij that you might have had a lesser copy - anyway, thanks all - most helpful advice
#12
[quote name='anyscreenamewilldo' timestamp='1286529217' post='3550']

pardon for dragging this post back from the past, but i just wanted to say that i picked up one of these lenses for the A mount and on a quick first look today it seems to be a good and useful buy for me, and at a good price too - so thanks Allan and Brightc for the pointers and sorry Lomskij that you might have had a lesser copy - anyway, thanks all - most helpful advice

[/quote]

That is wonderful news, ASNWD! I hope it will prove itself to be worthy of your A900, and look forward to seeing some photos you made with it <img src='http://forum.photozone.de/public/style_emoticons/<#EMO_DIR#>/smile.gif' class='bbc_emoticon' alt='Smile' />
#13
The frog?
#14
I just added a new photo to the gallery of the Red Arrows taken with my Sigma 100-300 <img src='http://forum.photozone.de/public/style_emoticons/<#EMO_DIR#>/smile.gif' class='bbc_emoticon' alt='Smile' />
#15
Hi Allan,



Nice photographs(as always)!



In a previous posting of mine I asked for advise for a 'new' telelens for my EOS 5D 1. You advised me, as did others, to go for the Sigma 100-300/4.0. New it is too expensive for me, but now I found a secondhand model for 430 euro and the seller says it as good as new. It is not a DG model, but I don't know if there is a big difference between the DG and the non-Dg models? Which model do you have and do you know whether the difference is worthwhile?



Hope to hear from you.





Best wishes,



Reinier
#16
[quote name='Reinier' timestamp='1286969825' post='3602']

Hi Allan,



Nice photographs(as always)!



In a previous posting of mine I asked for advise for a 'new' telelens for my EOS 5D 1. You advised me, as did others, to go for the Sigma 100-300/4.0. New it is too expensive for me, but now I found a secondhand model for 430 euro and the seller says it as good as new. It is not a DG model, but I don't know if there is a big difference between the DG and the non-Dg models? Which model do you have and do you know whether the difference is worthwhile?



Hope to hear from you.





Best wishes,



Reinier

[/quote]

Hello Reinier,



There is no significant difference. The lens is optically the same. The non-DG is just older.... when Sigma started to introduce "digital" lenses (APS-C lenses), they needed a way to differentiate the lens lines in nomenclature. APS-C lenses got a "DC" addition. Sigma also added a new coating to the back element because sensors reflect a lot more light back than film, to for instance fight "purple fringing".



Lenses for full frame also got that coating, and got "DG" added to their name. But non-DG lenses perform still very well, one can not tell the difference.



I do believe you have a Canon EOS, I am correct? The only thing you should make sure of is that the lens actually is compatible with the modern EOS digital SLRs. Lenses from before 2003 or so would be incompatible with the aperture communication signals, generating an "Err99" on older DSLRs and a "Lens error" on newer DSLRs. Sigma used to offer "re-chipping" to make that problem disappear, but re-chipping is not possible anymore, as far as I know.



So... just make sure that the lens is either already compatible, or has been re-chipped in the first half of this decade. Easily tested too (and you can ask the seller. of course). Just make a picture, not wide open. If the camera locks with an error, it is not compatible electrically. If it normally exposes a photo, all is well.
#17
[quote name='Brightcolours' timestamp='1286971556' post='3606']

Hello Reinier,



There is no significant difference. The lens is optically the same. The non-DG is just older.... when Sigma started to introduce "digital" lenses (APS-C lenses), they needed a way to differentiate the lens lines in nomenclature. APS-C lenses got a "DC" addition. Sigma also added a new coating to the back element because sensors reflect a lot more light back than film, to for instance fight "purple fringing".



Lenses for full frame also got that coating, and got "DG" added to their name. But non-DG lenses perform still very well, one can not tell the difference.



I do believe you have a Canon EOS, I am correct? The only thing you should make sure of is that the lens actually is compatible with the modern EOS digital SLRs. Lenses from before 2003 or so would be incompatible with the aperture communication signals, generating an "Err99" on older DSLRs and a "Lens error" on newer DSLRs. Sigma used to offer "re-chipping" to make that problem disappear, but re-chipping is not possible anymore, as far as I know.



So... just make sure that the lens is either already compatible, or has been re-chipped in the first half of this decade. Easily tested too (and you can ask the seller. of course). Just make a picture, not wide open. If the camera locks with an error, it is not compatible electrically. If it normally exposes a photo, all is well.

[/quote]

Just one addition: DG generally also means that the rearmost lens element has been coated if that wasn't the case already.



You can check this by shooting with a bright light just outside the frame, and compare the shots against another lens, known to be of DG (any Canon EF lens) under the same conditions. If you do get a lot of flare, glare of veiling, it likely isn't coated, and may cause similar effects under "normal" shooting circumstances, if les spronounced. This because for film there wasn't the necesaity to do extensive coating on the back of the last element: film only reflects 2 to 3 % of the light received, while a digital sensor reflects about 40 to 60 %.



In short, check that it works with your camera, adn check that it doesn't show any significant amount of veiling, flare or glare.



Kind regards, Wim
Gear: Canon EOS R with 3 primes and 2 zooms, 4 EF-R adapters, Canon EOS 5 (analog), 9 Canon EF primes, a lone Canon EF zoom, 2 extenders, 2 converters, tubes; Olympus OM-D 1 Mk II & Pen F with 12 primes, 6 zooms, and 3 Metabones EF-MFT adapters ....
#18
[quote name='wim' timestamp='1286989047' post='3614']

Just one addition: DG generally also means that the rearmost lens element has been coated if that wasn't the case already.



You can check this by shooting with a bright light just outside the frame, and compare the shots against another lens, known to be of DG (any Canon EF lens) under the same conditions. If you do get a lot of flare, glare of veiling, it likely isn't coated, and may cause similar effects under "normal" shooting circumstances, if les spronounced. This because for film there wasn't the necesaity to do extensive coating on the back of the last element: film only reflects 2 to 3 % of the light received, while a digital sensor reflects about 40 to 60 %.



In short, check that it works with your camera, adn check that it doesn't show any significant amount of veiling, flare or glare.



Kind regards, Wim

[/quote]



I have the non-DG version and yes it suffers from a bit of flare and low-contrast if you are shooting directly into the light. However with this type of lens it is very rare to shoot in these circumstances and so is rarely a problem.



Allan
#19
[quote name='allanmb' timestamp='1286998105' post='3617']

I have the non-DG version and yes it suffers from a bit of flare and low-contrast if you are shooting directly into the light. However with this type of lens it is very rare to shoot in these circumstances and so is rarely a problem.



Allan

[/quote]

The flare (and resulting lower contrast) are not resolved by a new back element coating... the DG version will show similar flare.
#20
[quote name='Brightcolours' timestamp='1286998454' post='3618']

The flare (and resulting lower contrast) are not resolved by a new back element coating... the DG version will show similar flare.

[/quote]

Not all of it no, but 99% of especially all veiling, plus some flare, caused by reflections of the back element will.



Regards, Wim
Gear: Canon EOS R with 3 primes and 2 zooms, 4 EF-R adapters, Canon EOS 5 (analog), 9 Canon EF primes, a lone Canon EF zoom, 2 extenders, 2 converters, tubes; Olympus OM-D 1 Mk II & Pen F with 12 primes, 6 zooms, and 3 Metabones EF-MFT adapters ....
  


Forum Jump:


Users browsing this thread:
1 Guest(s)